Custom Pools & Spas
Custom pool, spa, and water-feature construction integrated into broader architecture and site work.
SSC's custom pool work includes infinity edges, raised spas, glass-mosaic tile installations, sunken seating coves, attached spas, and rooftop terrace pools. Each pool is engineered as an integral element of the home's rear elevation and outdoor living composition — not as a separate trade installed after the fact. Constructed to South Florida coastal standards with attention to long-term performance in the marine climate, SSC's pools are designed and built to the same craftsmanship standard applied to the homes themselves.
SSC's custom pool work includes infinity edges, raised spas, glass-mosaic tile installations, sunken seating coves, attached spas, and rooftop terrace pools. Each pool is engineered as an integral element of the home's rear elevation and outdoor living composition — not as a separate trade installed after the fact. Constructed to South Florida coastal standards with attention to long-term performance in the marine climate, SSC's pools are designed and built to the same craftsmanship standard applied to the homes themselves.
Why Choose Steven Sellers Contracting for Custom Pools & Spas
Pool shells engineered as structural elements of the residence, not as a separate trade installed afterward: Steven Sellers Contracting coordinates the pool engineer, structural engineer of the home, and the waterproofing scope as a single envelope — eliminating the rear-elevation cracking, deck-to-coping separation, and waterproofing failures common when a pool subcontractor builds in isolation from the home's structural design.
South Florida marine climate construction since 1994: 32 years of building in salt air, high water table, and hurricane wind-load environments — pool finishes, coping, equipment selection, and equipment-pad siting are specified for Palm Beach County coastal performance, not for inland Florida conditions.
Hydraulic and equipment design that survives Florida code and Florida storms: Equipment pad elevations, suction-line VGB compliance, hurricane-rated equipment enclosures, and backflow protection are specified at the design stage — not retrofit after the first inspection failure.
Glass-mosaic tile, infinity edges, raised spas, and rooftop terrace pools built to the same craftsmanship standard as the home: Steven Sellers Contracting executes the high-end pool details — perimeter overflow, vanishing edges, fire-and-water features, automated controls — under the same supervision as the residence itself.
Integrated permitting across pool, structural, electrical, gas, and plumbing trades: Pool projects often stall when separate permits from separate contractors fall out of sequence — single-firm execution keeps the permit chain aligned across Palm Beach County and municipal building departments.
Florida Certified General Contractor License CGC057260: The credential required to pull permits, qualify the project, and serve as principal of record on Palm Beach County residential construction including pool and spa work integrated into the residence envelope.
What's Included in Custom Pools & Spas
Pool Shell Engineering & Construction: Structural pool shell designed and built in coordination with the home's structural envelope, including steel schedule, gunite or shotcrete application, and waterproofing membrane.
Spa & Water-Feature Integration: Attached spas, raised spas, perimeter overflow spas, fire-and-water features, sheer descents, scuppers, and bubblers engineered into the pool's hydraulic system.
Finishes & Tile: Glass-mosaic tile, pebble and quartz interior finishes, natural-stone and porcelain coping, and waterline tile selection coordinated with the home's exterior material palette.
Hydraulic & Equipment Design: Variable-speed pump sizing, filtration sizing, sanitation system specification (salt, ozone, UV, or chlorine), and equipment pad layout designed for serviceability and South Florida code.
Heating, Lighting & Automation: Gas, electric, or heat-pump heating, LED color-change lighting, and automation systems (Pentair, Jandy, Hayward Omni) integrated with the home's control infrastructure.
Deck, Coping & Surround Integration: Pool deck construction in travertine, marble, porcelain, or shellstone — set at the same finished floor relationship as the home's interior floor for seamless indoor-outdoor transition.
Permitting & Inspections: Pool, structural, electrical, gas, and plumbing permits coordinated across Palm Beach County and municipal building departments, including final VGB and barrier-code inspections.
Equipment Enclosure & Storm Protection: Equipment pad siting, hurricane-rated enclosures, and post-storm operational protocols specified for South Florida marine and storm exposure.
The Custom Pools & Spas Process
Starts with a pool-and-residence integration review: Steven Sellers reviews the home's structural drawings, rear elevation, finished-floor relationships, and outdoor composition before any pool design moves forward.
Pool concept and hydraulic design: Pool geometry, edge treatment, attached spa or water-feature configuration, and hydraulic system are designed in coordination with the pool engineer and the home's structural engineer.
Finish, tile, and coping selection: Interior finish, waterline tile, coping, and deck material are selected against the home's exterior material palette, with samples reviewed in the actual site light conditions.
Permitting and engineering submittal: Pool, structural, electrical, gas, and plumbing permits are submitted in sequence across Palm Beach County or the municipal building department, with engineering signed and sealed.
Excavation and shell construction: Site excavation, steel placement, plumbing rough-in, gunite or shotcrete application, and waterproofing are executed under Steven Sellers Contracting supervision.
Equipment, electrical, and gas installation: Pumps, filtration, sanitation, heating, automation, and lighting are installed to manufacturer specification and Florida code, with VGB-compliant suction protection verified.
Tile, coping, and deck finishing: Waterline tile, coping, interior finish, and pool deck are installed in sequence with the home's exterior finishing schedule.
Startup, inspection, and homeowner orientation: Pool startup, water chemistry stabilization, final inspections (including barrier code and VGB compliance), and a homeowner orientation on the automation system and equipment serviceability.
Custom Pools & Spas Scope & Investment Tiers
Residential Pool & Spa
Custom pool with attached spa, standard hydraulic and equipment package, and integrated deck and coping. Suited to interior Boca Raton and Delray Beach residences in the 4,000–6,000 square-foot range.
Luxury Pool, Spa & Water-Feature Composition
Custom pool with raised or perimeter-overflow spa, fire-and-water features, glass-mosaic tile, automation, and stone-coping integration. Suited to coastal Boca Raton, Delray Beach, and Highland Beach residences in the 6,000–10,000 square-foot range.
Estate Pool & Aquatic Environment
Vanishing-edge or perimeter-overflow pool, raised spa, integrated water features, full automation, premium tile and stone, and deck-and-cabana integration. Suited to direct-Intracoastal and oceanfront residences in Highland Beach, Gulf Stream, Manalapan, and the Gold Coast at 10,000+ square feet.
Project investment varies by pool geometry, hydraulic complexity, finish selection, automation scope, and site conditions. Initial consultation includes a pool scope framework specific to the residence and rear-elevation composition. Contact Steven Sellers Contracting directly at (561) 441-6557 to schedule a consultation.
A pool is the single most visible structural element of a Palm Beach County rear elevation and the single most common warranty-failure point on luxury residences built by uncoordinated trades. Steven Sellers Contracting builds pools as part of the residence — same structural review, same waterproofing scope, same craftsmanship supervision, same principal of record. The vanishing-edge pool on a Delray Beach Intracoastal lot, the rooftop terrace pool on a Boca Raton coastal residence, and the perimeter-overflow spa on a Highland Beach oceanfront estate all share one thing: they were engineered before the home's rear elevation was poured, not bolted on after.
Why Choose Steven Sellers Contracting for Custom Pools & Spas
Pool shells engineered as structural elements of the residence, not as a separate trade installed afterward: Steven Sellers Contracting coordinates the pool engineer, structural engineer of the home, and the waterproofing scope as a single envelope — eliminating the rear-elevation cracking, deck-to-coping separation, and waterproofing failures common when a pool subcontractor builds in isolation from the home's structural design.
South Florida marine climate construction since 1994: 32 years of building in salt air, high water table, and hurricane wind-load environments — pool finishes, coping, equipment selection, and equipment-pad siting are specified for Palm Beach County coastal performance, not for inland Florida conditions.
Hydraulic and equipment design that survives Florida code and Florida storms: Equipment pad elevations, suction-line VGB compliance, hurricane-rated equipment enclosures, and backflow protection are specified at the design stage — not retrofit after the first inspection failure.
Glass-mosaic tile, infinity edges, raised spas, and rooftop terrace pools built to the same craftsmanship standard as the home: Steven Sellers Contracting executes the high-end pool details — perimeter overflow, vanishing edges, fire-and-water features, automated controls — under the same supervision as the residence itself.
Integrated permitting across pool, structural, electrical, gas, and plumbing trades: Pool projects often stall when separate permits from separate contractors fall out of sequence — single-firm execution keeps the permit chain aligned across Palm Beach County and municipal building departments.
Florida Certified General Contractor License CGC057260: The credential required to pull permits, qualify the project, and serve as principal of record on Palm Beach County residential construction including pool and spa work integrated into the residence envelope.
What's Included in Custom Pools & Spas
Pool Shell Engineering & Construction: Structural pool shell designed and built in coordination with the home's structural envelope, including steel schedule, gunite or shotcrete application, and waterproofing membrane.
Spa & Water-Feature Integration: Attached spas, raised spas, perimeter overflow spas, fire-and-water features, sheer descents, scuppers, and bubblers engineered into the pool's hydraulic system.
Finishes & Tile: Glass-mosaic tile, pebble and quartz interior finishes, natural-stone and porcelain coping, and waterline tile selection coordinated with the home's exterior material palette.
Hydraulic & Equipment Design: Variable-speed pump sizing, filtration sizing, sanitation system specification (salt, ozone, UV, or chlorine), and equipment pad layout designed for serviceability and South Florida code.
Heating, Lighting & Automation: Gas, electric, or heat-pump heating, LED color-change lighting, and automation systems (Pentair, Jandy, Hayward Omni) integrated with the home's control infrastructure.
Deck, Coping & Surround Integration: Pool deck construction in travertine, marble, porcelain, or shellstone — set at the same finished floor relationship as the home's interior floor for seamless indoor-outdoor transition.
Permitting & Inspections: Pool, structural, electrical, gas, and plumbing permits coordinated across Palm Beach County and municipal building departments, including final VGB and barrier-code inspections.
Equipment Enclosure & Storm Protection: Equipment pad siting, hurricane-rated enclosures, and post-storm operational protocols specified for South Florida marine and storm exposure.
The Custom Pools & Spas Process
Starts with a pool-and-residence integration review: Steven Sellers reviews the home's structural drawings, rear elevation, finished-floor relationships, and outdoor composition before any pool design moves forward.
Pool concept and hydraulic design: Pool geometry, edge treatment, attached spa or water-feature configuration, and hydraulic system are designed in coordination with the pool engineer and the home's structural engineer.
Finish, tile, and coping selection: Interior finish, waterline tile, coping, and deck material are selected against the home's exterior material palette, with samples reviewed in the actual site light conditions.
Permitting and engineering submittal: Pool, structural, electrical, gas, and plumbing permits are submitted in sequence across Palm Beach County or the municipal building department, with engineering signed and sealed.
Excavation and shell construction: Site excavation, steel placement, plumbing rough-in, gunite or shotcrete application, and waterproofing are executed under Steven Sellers Contracting supervision.
Equipment, electrical, and gas installation: Pumps, filtration, sanitation, heating, automation, and lighting are installed to manufacturer specification and Florida code, with VGB-compliant suction protection verified.
Tile, coping, and deck finishing: Waterline tile, coping, interior finish, and pool deck are installed in sequence with the home's exterior finishing schedule.
Startup, inspection, and homeowner orientation: Pool startup, water chemistry stabilization, final inspections (including barrier code and VGB compliance), and a homeowner orientation on the automation system and equipment serviceability.
Custom Pools & Spas Scope & Investment Tiers
Residential Pool & Spa
Custom pool with attached spa, standard hydraulic and equipment package, and integrated deck and coping. Suited to interior Boca Raton and Delray Beach residences in the 4,000–6,000 square-foot range.
Luxury Pool, Spa & Water-Feature Composition
Custom pool with raised or perimeter-overflow spa, fire-and-water features, glass-mosaic tile, automation, and stone-coping integration. Suited to coastal Boca Raton, Delray Beach, and Highland Beach residences in the 6,000–10,000 square-foot range.
Estate Pool & Aquatic Environment
Vanishing-edge or perimeter-overflow pool, raised spa, integrated water features, full automation, premium tile and stone, and deck-and-cabana integration. Suited to direct-Intracoastal and oceanfront residences in Highland Beach, Gulf Stream, Manalapan, and the Gold Coast at 10,000+ square feet.
Project investment varies by pool geometry, hydraulic complexity, finish selection, automation scope, and site conditions. Initial consultation includes a pool scope framework specific to the residence and rear-elevation composition. Contact Steven Sellers Contracting directly at (561) 441-6557 to schedule a consultation.
A pool is the single most visible structural element of a Palm Beach County rear elevation and the single most common warranty-failure point on luxury residences built by uncoordinated trades. Steven Sellers Contracting builds pools as part of the residence — same structural review, same waterproofing scope, same craftsmanship supervision, same principal of record. The vanishing-edge pool on a Delray Beach Intracoastal lot, the rooftop terrace pool on a Boca Raton coastal residence, and the perimeter-overflow spa on a Highland Beach oceanfront estate all share one thing: they were engineered before the home's rear elevation was poured, not bolted on after.
Why Choose Steven Sellers Contracting for Custom Pools & Spas
Pool shells engineered as structural elements of the residence, not as a separate trade installed afterward: Steven Sellers Contracting coordinates the pool engineer, structural engineer of the home, and the waterproofing scope as a single envelope — eliminating the rear-elevation cracking, deck-to-coping separation, and waterproofing failures common when a pool subcontractor builds in isolation from the home's structural design.
South Florida marine climate construction since 1994: 32 years of building in salt air, high water table, and hurricane wind-load environments — pool finishes, coping, equipment selection, and equipment-pad siting are specified for Palm Beach County coastal performance, not for inland Florida conditions.
Hydraulic and equipment design that survives Florida code and Florida storms: Equipment pad elevations, suction-line VGB compliance, hurricane-rated equipment enclosures, and backflow protection are specified at the design stage — not retrofit after the first inspection failure.
Glass-mosaic tile, infinity edges, raised spas, and rooftop terrace pools built to the same craftsmanship standard as the home: Steven Sellers Contracting executes the high-end pool details — perimeter overflow, vanishing edges, fire-and-water features, automated controls — under the same supervision as the residence itself.
Integrated permitting across pool, structural, electrical, gas, and plumbing trades: Pool projects often stall when separate permits from separate contractors fall out of sequence — single-firm execution keeps the permit chain aligned across Palm Beach County and municipal building departments.
Florida Certified General Contractor License CGC057260: The credential required to pull permits, qualify the project, and serve as principal of record on Palm Beach County residential construction including pool and spa work integrated into the residence envelope.
What's Included in Custom Pools & Spas
Pool Shell Engineering & Construction: Structural pool shell designed and built in coordination with the home's structural envelope, including steel schedule, gunite or shotcrete application, and waterproofing membrane.
Spa & Water-Feature Integration: Attached spas, raised spas, perimeter overflow spas, fire-and-water features, sheer descents, scuppers, and bubblers engineered into the pool's hydraulic system.
Finishes & Tile: Glass-mosaic tile, pebble and quartz interior finishes, natural-stone and porcelain coping, and waterline tile selection coordinated with the home's exterior material palette.
Hydraulic & Equipment Design: Variable-speed pump sizing, filtration sizing, sanitation system specification (salt, ozone, UV, or chlorine), and equipment pad layout designed for serviceability and South Florida code.
Heating, Lighting & Automation: Gas, electric, or heat-pump heating, LED color-change lighting, and automation systems (Pentair, Jandy, Hayward Omni) integrated with the home's control infrastructure.
Deck, Coping & Surround Integration: Pool deck construction in travertine, marble, porcelain, or shellstone — set at the same finished floor relationship as the home's interior floor for seamless indoor-outdoor transition.
Permitting & Inspections: Pool, structural, electrical, gas, and plumbing permits coordinated across Palm Beach County and municipal building departments, including final VGB and barrier-code inspections.
Equipment Enclosure & Storm Protection: Equipment pad siting, hurricane-rated enclosures, and post-storm operational protocols specified for South Florida marine and storm exposure.
The Custom Pools & Spas Process
Starts with a pool-and-residence integration review: Steven Sellers reviews the home's structural drawings, rear elevation, finished-floor relationships, and outdoor composition before any pool design moves forward.
Pool concept and hydraulic design: Pool geometry, edge treatment, attached spa or water-feature configuration, and hydraulic system are designed in coordination with the pool engineer and the home's structural engineer.
Finish, tile, and coping selection: Interior finish, waterline tile, coping, and deck material are selected against the home's exterior material palette, with samples reviewed in the actual site light conditions.
Permitting and engineering submittal: Pool, structural, electrical, gas, and plumbing permits are submitted in sequence across Palm Beach County or the municipal building department, with engineering signed and sealed.
Excavation and shell construction: Site excavation, steel placement, plumbing rough-in, gunite or shotcrete application, and waterproofing are executed under Steven Sellers Contracting supervision.
Equipment, electrical, and gas installation: Pumps, filtration, sanitation, heating, automation, and lighting are installed to manufacturer specification and Florida code, with VGB-compliant suction protection verified.
Tile, coping, and deck finishing: Waterline tile, coping, interior finish, and pool deck are installed in sequence with the home's exterior finishing schedule.
Startup, inspection, and homeowner orientation: Pool startup, water chemistry stabilization, final inspections (including barrier code and VGB compliance), and a homeowner orientation on the automation system and equipment serviceability.
Custom Pools & Spas Scope & Investment Tiers
Residential Pool & Spa
Custom pool with attached spa, standard hydraulic and equipment package, and integrated deck and coping. Suited to interior Boca Raton and Delray Beach residences in the 4,000–6,000 square-foot range.
Luxury Pool, Spa & Water-Feature Composition
Custom pool with raised or perimeter-overflow spa, fire-and-water features, glass-mosaic tile, automation, and stone-coping integration. Suited to coastal Boca Raton, Delray Beach, and Highland Beach residences in the 6,000–10,000 square-foot range.
Estate Pool & Aquatic Environment
Vanishing-edge or perimeter-overflow pool, raised spa, integrated water features, full automation, premium tile and stone, and deck-and-cabana integration. Suited to direct-Intracoastal and oceanfront residences in Highland Beach, Gulf Stream, Manalapan, and the Gold Coast at 10,000+ square feet.
Project investment varies by pool geometry, hydraulic complexity, finish selection, automation scope, and site conditions. Initial consultation includes a pool scope framework specific to the residence and rear-elevation composition. Contact Steven Sellers Contracting directly at (561) 441-6557 to schedule a consultation.
A pool is the single most visible structural element of a Palm Beach County rear elevation and the single most common warranty-failure point on luxury residences built by uncoordinated trades. Steven Sellers Contracting builds pools as part of the residence — same structural review, same waterproofing scope, same craftsmanship supervision, same principal of record. The vanishing-edge pool on a Delray Beach Intracoastal lot, the rooftop terrace pool on a Boca Raton coastal residence, and the perimeter-overflow spa on a Highland Beach oceanfront estate all share one thing: they were engineered before the home's rear elevation was poured, not bolted on after.
Question in mind?
Let's Connect
Question in mind?
Let's Connect
Visuals of our services
Samples
